The Linksys WiFi Range Extender Setup process completely depends on the model number of WiFi range extender you use. Every model of the Linksys device has its own configuration settings so that you can know the right model of your device you own.

Extender.linksys.com is known as the default web address that is meant for configuring all models of Linksys WiFi range extenders. On the other hand, http://extender.linksys.com is known as the setup and login page of Linksys wireless repeater (extender).

Important Note: Extender.linksys.com is not a regular website where users need to enter any personal information or confidential data. Instead, it redirects to the Linksys extender setup page.

How to Find the model number of Linksys WiFi Range Extender

To complete Linksys wireless range extender installation and configuration process without any issues, then you have to find out the model number of your device. Normally, the model number is present at the top panel of the Linksys WiFi booster (extender).

On the other hand, the model number of an older version of Linksys range extenders can be found at the bottom panel of the device. In case, the sticker which contains the model number is damaged or missing then users can take help from our professionals “the solution provider of Linksys” on 1-866-808-4180(toll-free).

A Handy Guide to Complete Linksys Initial Setup Process with Ease

Manual Configuration of Linksys Smart Wireless Range Extender

It hardly takes only minimal minutes to install and configure Linksys WiFi range extender setup manually like a pro. Just a few rose petal steps to follow and you are done.

· Prior to getting started with the setup process of Linksys range expander (extender), get the basic information about the main router such as network channel, network name (SSID), security key (password or passphrase), etc.

· Reset the Linksys extender back to default values.

· Once done, power on the Linksys wireless booster.

· Connect extender to a computer or laptop.

· Open a web browser of your choice and into the URL bar type the IP address (default) of your device.

· In case you find any problem while accessing the Linksys extender login page, then without any delay get technical assistance from our certified experts.

· Enter username and password (default) to log in.

· Now, what after that? When the basic home screen displays type the network name (SSID) of your main router.

· Next, select the manual option and shut down the range extender and after some time turn it on again.

Good Job! You have successfully configured your wireless repeater.

A Quick Tip: To ensure that the range extender has been configured and set up properly, it is essential to access the DHCP table of the main router and check whether your wireless repeater is listed there or not. In case it is not, then it is requested to give us a call on the aforementioned toll-free number and discuss all your questions and annoying queries with highly-qualified experts.

DHCP stands for Dynamic Host Configuration Protocol which is a network protocol that enables a server to assign an IP address to a computer or laptop automatically from a defined range of numbers configured for a given home network.

Setup of Linksys Signal Booster using WPS

WPS (WiFi protected setup) is a security standard for a wireless networks that is supposed to make safe, secure, and reliable connections between smart WiFi-enabled devices and main wireless router. Now, we will provide the basic do-follow creamy smooth steps for WiFi-Protected Setup (WPS) configuration of Linksys range extender:

· Plug in your smart WiFi range extender to a shock-proof and damage-free electrical outlet.

· Hit the WPS button on it.

· On your device, there is a WPS LED that indicates the status of Linksys extender.

· WPS Light Emitting Diode (LED) will illuminate to solid amber (orange) showing that the extender is getting configured with the main router.

· After a few minutes, the WPS LED on your device will become solid green. It indicates that the connection between the router and the range extender is successful.

Note: If you own dual-band range extender, repeat step two (2).

Well done! Linksys WiFi range extender has successfully been set up using WPS. At any point, if you get stuck and need help, feel free to seek advice from our Technical Support Department via the comment section below.

Our motto is customer satisfaction.